MG-ESU200M

MG-ESU200M is a Multifunctional electrosurgical generator with a wide range of application departments and a very high-cost performance.

It uses a new generation of tissue density instant feedback technology, which can automatically adjust the output power according to the change in tissue density. The surgeon brings convenience and reduces surgical damage and is particularly suitable for surgical applications such as general surgery, orthopedic surgery, gynecological surgery, ENT surgery, neurosurgery, skin plastic surgery, and oral and maxillofacial surgery.

3 Monopolar Cutting Modes: Pure cut, Blend 1, Blend 2

Pure cut: cut the tissue cleanly and accurately without coagulation

Blend 1: Use when the cutting speed is slightly slow and a small amount of hemostasis is required.

Blend 2: Compared with blend 1, it is used when the cutting speed is slightly slower and the better hemostatic effect is needed.

3 Monopolar Coagulation Modes: Spray Coagulation, Forced Coagulation, Soft Coagulation

Spray Coagulation: High-efficiency coagulation without contact surface. The coagulation depth is shallow. The tissue is removed by evaporation. It usually uses a Blade or ball electrode for coagulation.

Forced Coagulation: It’s non-contact coagulation. The output threshold voltage is lower than spray coagulation. It’s suitable for coagulation in a small area.

Soft Coagulation: Mild coagulation penetrates deeply to prevent tissue carbonization and reduce electrode adhesion to tissue.

2 Bipolar Output Modes: Standard And Fine

Standard Mode: It’s suitable for most bipolar applications. Keep the low voltage to prevent sparks.

Fine Mode: It’s used for high precision and fine control of drying amount. Keep the low voltage to prevent sparks.

CQM contact quality monitoring system

Automatically monitor the quality of contact between the dispersive pad and the patient in real-time. If the contact quality is lower than the set value, there will be a sound and light alarm and cut off the power output to ensure safety.

Functional self-test:

After each turn-on, the high-frequency electrosurgical unit will immediately execute a self-test procedure. Once the internal abnormality of the system is found and the self-test fails, the current output will be automatically cut off immediately. This ensures that the MG-ESU200M generator is always in good working condition and performance. During the self-test, it is also tested whether the connected accessories are functioning normally.

*Please send an inquiry to learn about bulk discounts!